Brookfield DV-II+ Programmable Viscometer Instrukcja Użytkownika Pobierz pdf (Strona 64)

Brookfield Engineering Labs., Inc. Page 64 Manual No. M/97-164-F1102

Figure G1

Analog Output:

The analog outputs for temperature and % torque are accessed from the 9-pin connector located on

the rear panel of the DV-II+. The pin connections are shown in Figure G1.

The output cable (Part No. DVP-96Y) connections are:

Red Wire: Temperature Output

Black Wire: Temperature Ground

White Wire: % Torque Output

Green Wire: % Torque Ground

Note: Please contact Brookfield Engineering Laboratories or your local dealer/

distributor for purchase of the DVP-96Y analog output cable.

No Connection

Transmit Data (TxD)

No Connection

High Speed Print

(Note 1)

High Speed Print

(Note 1)

Serial Ground

Analog Ground

Analog % Torque

(Note 2)

Analog Temperature

(Note 3)

DV-II+

Serial and Analog Outputs

Notes:

1. Placing a jumper across pins 4 and 9 causes the DV-II+ to output printer

data at a 3 line-per-second rate. No jumper across pins 4 and 9 retains the

once-per-second printer output rate.

2. This is a 0-1 volt d.c. output where 0 volts corresponds to 0% torque and

1 volt corresponds to 100 % torque with a resolution of 1 millivolt (0.1%).

3. This is a 0-3.75 volt d.c. output where 0 volts corresponds to -100°C and

3.75 volts corresponds to +275°C with a resolution of 1 millivolt (0.1°C).

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 74 75

Brak uwag

Brookfield DV-II+ Programmable Viscometer Instrukcja Użytkownika Strona 64