Brookfield CT3 Texture Analyzer Instrukcja Użytkownika Pobierz pdf (Strona 26)

Brookeld Engineering Labs., Inc. Page 26 Manual No. M08-372-C0113

The return speed after the target is reached is the post test speed which is called Post Speed on this

screen. It may be set from 0.1mm/s to 10.0mm/s. For some tests, Such as TPA, the post test speed

is irrelevant because it will always be the same as the test speed. The two tests for which this is

the case are TPA and the Cycle test.

Temperature units may be set to either degrees Celsius or Fahrenheit. Once set on the Global Params

screen these parameters will remain in effect until changed again on this screen.

III.8 TEXTURE LOADER SOFTWARE (See Appendix C for details)

Texture Loader software was supplied with your CT3 on the bundled software CD. After installing

this software into a computer you can add up to 10 additional test programs to the CT3 menu based

upon any one of the test methods described above. For example, suppose you routinely test rye

bread using a TPA test with a trigger value of 5g, deformation of 18mm and a test speed of 3mm/s.

You can create a test called RYE with these test parameters. After downloading this test to the

CT3, you will see the RYE test appear in the display as you scroll through the test methods. The

Texture Loader program is supplied as a convenience for our customers who routinely run tests

with established parameters.

III.9 Checking Calibration

TheloadcalibrationoftheCT3TextureAnalyzercanbeveriedusingtheStaticLoadmode.

WerecommendthatyouusetheBrookeldweightsetappropriateforyourCT3loadrange:

BEL Part No. Load Range

 •TA-CW-100C 100gram

 •TA-CW-1000C 1000gram

 •TA-CW-1500C 1500gram

 •TA-CW-4500C 4500gram

 •TA-CW-10KGC 10kg

 •TA-CW-2550KGC 25kgand50kg

Thefrequencyofthecalibrationvericationshouldbesetinaccordancetoyourcompany

procedures.

1. Startthecalibrationvericationprocessusingtheselect/scrollknobtosetthetestmodeto

Static Load and press the start button. The display will request that you attach the hanger

mount to the probe shaft.

Note: TA-CW-100C does not include a hanger mount or hanger. A black, TA5 probe is in-

cluded and is used as the hanger. Each of the three weights are stacked on top of the

probe during step 4.

TEST: STATIC LOAD

*ATTACH HANGER MOUNT

*PRESS START

TO CONTINUE

III.31

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Brak uwag

Brookfield CT3 Texture Analyzer Instrukcja Użytkownika Strona 26